Post by dark on Jan 16, 2017 21:58:12 GMT
I had an FZ-1 testing station console that would power on (and even spin discs) but would not display any video or play any sound. I eventually wound up selling it as broken, but I discovered this fix where someone fixed a console with the same symptoms by replacing some capacitors. Definitely worth a try if you ever have these symptoms.
www.3do.cdinteractive.co.uk/viewtopic.php?f=25&t=3295
All credit to Retrotech of the 3DO Zone forums.
www.3do.cdinteractive.co.uk/viewtopic.php?f=25&t=3295
All credit to Retrotech of the 3DO Zone forums.
Hi everyone
ive been given a fz-1 which powers up and ejects cd tray etc but i can't get any video output.
i've tried multiple cables on all sockets (s-video,rca and rf) with no avail
the board is very very clean so but im thinking a cap or two have failed (although they all look in very good condition)ive got the 6800 uf one and will replace it today.
i've only found two references to it through google, one of which is a post on this forum...
www.3do.cdinteractive.co.uk/viewtopic.php?f=2&t=3032 which ive replied to and am no further on so i thought id start a new thread.
Has anyone had this problem? any feedback would be greatly appreciated!
ill edit later on when i've replaced the 6800 uf and the bios battery (not sure if a 3do will boot without the 3v battery).
thanks in advance
mike
UPDATE
after replacing the 6800uf cap i got video (the 3do logo) for about 10 seconds... yay! then it went again
on closer inspection it seems the 10uf 16v @ c36 seems like it might of leaked so gonna replace that now will update again asap
UPDATE 2
FIXED!!
rca is working ive got fz-1's spinning at me in space wohoooo
now im gonna have to test cd drive and get myself a controller lol
hope this helps someone!
ive been given a fz-1 which powers up and ejects cd tray etc but i can't get any video output.
i've tried multiple cables on all sockets (s-video,rca and rf) with no avail
the board is very very clean so but im thinking a cap or two have failed (although they all look in very good condition)ive got the 6800 uf one and will replace it today.
i've only found two references to it through google, one of which is a post on this forum...
www.3do.cdinteractive.co.uk/viewtopic.php?f=2&t=3032 which ive replied to and am no further on so i thought id start a new thread.
Has anyone had this problem? any feedback would be greatly appreciated!
ill edit later on when i've replaced the 6800 uf and the bios battery (not sure if a 3do will boot without the 3v battery).
thanks in advance
mike
UPDATE
after replacing the 6800uf cap i got video (the 3do logo) for about 10 seconds... yay! then it went again
on closer inspection it seems the 10uf 16v @ c36 seems like it might of leaked so gonna replace that now will update again asap
UPDATE 2
FIXED!!
rca is working ive got fz-1's spinning at me in space wohoooo
now im gonna have to test cd drive and get myself a controller lol
hope this helps someone!